Replacement (37i) Impeller Set from Aqua One - (25037i)
This is a genuine and original specification replacment Replacement (37i) Impeller Set manufactured by Aqua One for use with Aquis CF-1000 and Aquis CF-1200 external canister filters and will restore performance, should your impeller have become worn, or any of the impeller components damaged or lost
Replace every 12 months
Aquis CF canister filter pump impellers work extremely hard and the 37i Impeller is no exception, spinning thousands of times per hour in your Aquis CF filter. For this reason we recommmend that you replace your 37i Impeller set every 12 months. Doing so will also help to preserve the working life of the motor unit in your Aquis CF canister filter.
Keep a spare pump impeller
It's both smart and inexpensive to keep a spare 37i Impeller set and this will help to head off unforeseen emergencies should your original 37i Impeller fail unexpectedly. Pump impellers are the only moving, serviceable part in your canister filter pump and work extremely hard, spinning thousands of times an hour, so a little wear is often inevitable. Keeping a spare will avoid unecessary downtime of your 37i Impeller filter and help to prevent emergency situations.
Filter Pump Maintenance
Once a fortnight, (or sooner if you notice reduced waterflow) remove the impeller cover and check that the 37i Impeller isn't blocked with aquarium waste and that it can spin freely. Pipework adn fitler taps should be checked once a month to ensure that there are no blockages restricting waterflow and it's also good policy to check the condition of the filter media pads on a regular basis as these can sometimes become clogged with use. Rinse both Blue and Black sponges in a little aquarium water and replace Polymer Wool Pads as necessary, usually every 4 to 6 weeks.
Replacing the 37i Impeller
Aqua One's Aquis CF canister filters are reasonably easy to service and maintain and changing the 37i Impeller impeller isn't a difficult process. First of all disconnect the power supply, then turn the filter taps off. Unclip the four clamps that hold the head in place and seperate the body head from the body. The impeller is located underneath the impeller cover on the underside of the filter head. The 37i Impeller is magnetic and should be reasonably easy to remove. Install the 37i Impeller and re-check that the impeller chamber is clear of debris and aquarium waste. Replace the impeller cover and simply reverse the process to get your Aquis CF canister filter up and running again.
Need help?
If you have any questions regarding the 37i Impeller or are unsure of exactly which Aquis CF filter spares and accessories you require, please do contact us. We are the UK's leading authority on all that is Aqua One.
* See all spares and accessories for Aquis CF-1000 and Aquis CF-1200 external filters
