Aqua One (104i) Replacement Pump Impeller for EcoStyle 32 & EcoStyle 37

Replacement (104i) Impeller Set from Aqua One - (25104i)

This is a genuine and original specification replacment Replacement (104i) Impeller Set manufactured by Aqua One for use with EcoStyle 32 and EcoStyle 37 filter pumps and will restore performance, should your impeller have become worn, or any of the impeller components damaged or lost

Replace every 12 months

Filter pump impellers work extremely hard and the 104i Impeller is no exception, spinning thousands of times per hour in your aquarium Filter Pump. For this reason we recommmend that you replace your 104i Impeller set every 12 months. Doing so will also help to preserve the working life of your Filter Pump.

Keep a spare pump impeller

It's both smart and inexpensive to keep a spare 104i Impeller set and this will help to head off unforeseen emergencies should your original 104i Impeller fail unexpectedly. Filter pump impellers are the only moving, serviceable part in your filter pump and work extremely hard, spinning thousands of times an hour. Wear and eventual failure are pretty much inevitable and we'd always recommend that you keep a spare to avoid unecessary downtime of your Filter Pump.

Filter Pump Maintenance

Once a week (or sooner if you notice reduced waterflow) check the filter pump impeller isn't blocked with aquarium waste and that it can spin freely. Pipework should be checked once a month to ensure that there are no blockages restricting waterflow and it's also good policy to check the condition of the filter media pads on a regular basis as these can sometimes become clogged over time. Rinse Black sponges in a little aquarium water and replace Polymer Wool Pads as necessary, usually every 4 to 6 weeks.

Replacing the 104i Impeller

Aqua One's filter pump impellers are reasonably easy to replace. First of all disconnect the power supply, then remove the suction cups that hold the pump in place and take the pump out of your aquarium. Clip off the impeller cover and remove the impeller. The 104i Impeller is magnetic and should be reasonably easy to remove. Install the 104i Impeller, check the impeller chamber is clear of debris and then reverse the above process to re-install the filter pump in your aquarium.

Need help?

If you have any questions regarding the 104i Impeller or are unsure of exactly which aquarium filter spares and accessories you require, please do contact us. We are the UK's leading authority on all that is Aqua One.

* See all Aqua One Filter Spares & Accessories

We are an authorised and approved Aqua One stockist

If you're looking to purchase a spare part, accessory or filter replacement for your Aqua One aquarium or Filter, you can be confident that you are purchasing a genuine and original Aqua One Spare Part, from an authorised and Approved Stockist. This means that you will ALWAYS get full product support and of course a full manufacturers warranty on all products

Buy Official Aqua One Spares

Every Aqua One aquarium or filter product purchased here at Aqua One Parts is a genuine, Aqua One branded spare part or accessory, designed specifically for use in your Aqua One setup.

We are UK's only Dedicated Aqua One Retailer

We are the only dedicated Aqua One retailer in the UK, servicing many thousands of Aqua One customers every year and if you're considering purchasing a Replacement (104i) Impeller Set from us, you can do so with complete confidence that we are the UK's largest and most experienced Aqua One stockist.